Unfortunately, it turned out that this is unsuitable for rear display the D800.
He covered both up and down the display by at least 1-2mm per side!
The view is still by different points of view in the LV and when playing even
further restricted.
Properly visible which is unfortunately only after the gluing.
The glass for the upper, smaller shoulder display fits.
For me, this is unacceptable and I can only strongly advise against the purchase.
Furthermore stick both glasses not the entire surface of the display, you only have one
circulating tape.
This causes a bit more distance than if the glass would stick directly and possible unwanted reflections.
Also the protection I question because the edges quite smaller dust under the glass bishin to tape
may lay down the display until the contrary could scratch or to work under the tape through ...
What if this should wohlpassiert auftretten and then pressure is ausgebübt on the protective glass?
Buy instead of "GGS LARMOR LCD protective glass for Nikon D800 / D800E (the fourth G) - LCD real glass protector for Nikon D800 / D800E- 6-layer principle plus protective frame" with the Amazon ASIN: B00CWSE98W
In the LAMOR protection rear display sticks then the whole area and there is even enough space on all sides to the black rim of the glass to
certain adhesive tolerances to ensure.
In the upper display then only a peripheral adhesive strips, although again but probably not otherwise there :-(
This is from the same manufacturer and fits perfectly !!!
CONCLUSION unfortunately only one star, no not there yes!