Any time I warned the novice!
But here is a manual for those who are in galley:
-Install The driver and the program provided on the CD (W8 64 bit)
-made A yard connection as possible (no SCART extension or USB)
I bought a SCART adapter and more.
-Connection: VHS> Scart adapter> Cable 3 records (Provided)> VGB100, If you do not do as much as possible court you will have problems of sound or image ...
-Connect All
-Start The Arcsoft
-Go To capture.
-Set Parameters
-Source: Capture Device
- Video Input: Composite video (if you utilsez 3 sheets)
-Périphérique Its Audio Pin Source
-For VCR set the Video format SECAM B / G !!!
-Only THEN you turn on the VCR and start playback
And here the VHS is displayed on screen.
If you have no video signal c is that you do not have the correct format so GOOD LUCK;)