On Debian it proceeds as follows and first installed these packages:
apt-get install smartmontools idle3 tools
Now we read to control the current value of LCC (last value in the output line is the LCC). Is this after a short use increased significantly (eg 1000), the power saving function is probably constantly active and shortens the life of the hard drive:
smartctl -A / dev / sda | grep '^ 193 "
Off the sleep function (where "X" is the appropriate letter of the drive concerned, ie "a" in the majority of cases):
idle3ctl -d / dev / sdX
Now the NAS must be turned off completely again (reboot is not enough!) For the changes to access. That's it!