Perfect bag for the Surface Pro with 3 Type Cover

The 12.5 inch case is made for the Surface Pro 3. I stow the surface incl. The Type Cover it and the additional compartment also has easily the AC adapter, stylus and little things (USB Stick, etc.) place.
The Surface has on the narrow side for about 1.5 cm air in the bag. The fact that the Type Cover but outside with the felt side is not slipping the device.
Without Type Cover it slips hardly given the specific substance on the inside and the good padding.
But what I have to say, is that the Surface with cover Pull out a bit harder leaves because the whole bit "firmly rub" to the inside through the felt by the cover. Here you have something with her hand bag inside lift damits goes out easily.

The bag is inside (also the Bypass tray) gepolstet extremely soft and pleasant with a velor fabric. The padding is thick (about 5 mm per side) and soft!
Dick is the bag 3 cm. Even with the Surface inside there is not much more bulky. But of course, raises the extra bag when it is filled with the power supply.

On the upper longitudinal side of the bag has a handle which is sewn elastic at the outer ends and again "pulls" on the bag and thus does not protrude. This handle is does not look at the product photos strangely.
Even the look makes the bag nice thing here! Looks very classy and quality.

In general, the processing of the case is really good in this price range! Since there are much worse processed and protection bidder bags for 30 euros.

Detail photos I've attached. I can from all points of view highly recommend the Bag!