The Co-sleeping Chicco is very well thought out.
It can be used in single crib or cradle open on one side, you just open the closures and overshadow the bar high on this side that comes to slip below! No element drags, everything remains on the cradle.
The Fuchsia color that give better picture!
-------------------------------------------------- -------
In the box, disassembled include:
-------------------------------------------------- -------
- The structure with the fabric
- The "stringer" (plate + mattress)
- 2 feet
- A central structure (which holding feet together and on which lay the foundation)
- The attachment straps to bed
- A carrying case
- The instructions
----------------
Mounting
----------------
The assembly of the product is extremely simple, I did not have to open the manual to understand how:
It Clipse the central structure to 2 feet (same principle as tent poles: a metal tube which is slipped into the hole until the locking pin locks the assembly.
Then clipped the structure with the fabric on top of the feet (careful, there is a direction with an arrow as benchmark).
It only remains to put the mattress in the crib.
On each foot, there is a handle to lift system to unlock the cradle position and able to adjust the height. The two sides are independent, can be raised one side of the cradle.
The 6 positions are indicated by a number which appears on the foot to be sure that the two sides are the same height.
Under the cradle into the fabric, there is a mesh pocket in which you can store the straps. I just regret that they have not thought about making the record size of this pocket ...
Finally one of 2 feet has wheels with brakes, in order to move him into the house without lift.
Installation:
This cradle can be used in single cot, guarding closed on 4 sides, although relatively stable, I found that the structure had a little game (nothing that can not tip over, thankfully ...) It really is an auxiliary cradle when not strapped to a bed
To turn it into Co-sleeping: Just down the 2 closing of the business side of the top bar déboiter and trump in the pins in the cradle.
Then strap the cradle fixing past the foot of the cradle (clips planned) and passing in the mattress of the parental bed.
This prevents the cradle does not move away from the bed
The height is adjusted and hop co-sleeping is ready.
Everything has been planned, even if your bed does not drag the feet of the cradle under it, you can fold a part of the feet.
In transportation, it's not a cot in 5 minutes but it is mounted / dismounted, and once in the carrying case, it is flat enough to be transported in extra bed!
I am delighted with my purchase, I just wish it was limited to 9kg ...