Practical thing ...

I'm a fan of radio clocks, because there has to worry as rum the clock must be set in summer and winter time changes. In addition, you have always the current time and wasted not readjust his time. I had been given by my parents a nice photo watch, unfortunately there was only with quartz movement. So I thought the clock retrofit but always had a bit of concern, but for just 12 Euros (including shipping) can not do so much wrong. So I ordered and actually edit with a little fit the movement in my clock. Here's the data, hole diameter 8mm (actually 8.5), thickness of the clock until about 5mm.

After I installed everything, inserted battery and set the zero position. After the pointer turned to 12am and after a while actually exact time, including minutes. So far everything is working perfectly, I can only recommend the movement. The set of three pointers to one put together logically three different sets, as shown on the package, theoretically different sets are of course 3 * 3 * 3 possible course of which not all fit together equally well. I have mixed anyway two sets and find it looks good. If in doubt, you can still also optimize color spray or brush the color. Conclusion: highly recommended.