Premium protection for the Samsung Galaxy S3

The silicone case is worked very precisely and nestles like a second skin to your phone. Optically adjusts the black sleeve ideal for Klavirlackdesign black SG3. The recesses for the charging cable, the headset and the sensors are working precisely. The rocker switch for volume up / down and the On / Off switch are incorporated in the casing (!!!), so that these important elements are protected against contamination (refer important information at the onset). The Silicone Case is on the edge about 1 mm over the glass surface of the SG3. This small bead protects the glass surface in addition to a crash or simply from scratches, if you put the phone with the screen side down on a surface.

TIP To insert:
When installing the phone should start from the top or from the bottom and thereby pay close attention that the connectors are exactly centered in the slots. If you are not careful here, do you enable mobile 1-2mm inserting shifted to the left or right. However, this then leads to the rocker for volume up / down, or the On / Off switch too much pressure gets through the shell and is pressed permanently in circumstances.

PLUS:
- Additional protection for the screen by gently projecting bead on the edge
- Incorporated switch instead of cut-outs for high / low volume and on / off to prevent the penetration of dirt

CONCLUSION:
The silicone case is a first-class protection for the Samsung Galaxy S3. The shell hinders the operation in any way and falls visually hardly noticeable. For me the first choice for all purists who want to prevent as much as possible, but as much as necessary to protect their mobile phone from dirt or accident damage.