The packaging was rather simple, so that a hook was bent on the ladder. Well, can happen. Again straightened and on we went to the building. How to separate just the two nested conductors? On the scratch marks could be seen clearly that these were already compressed during packing by force and now no longer the same without violence are let loose from each other. I had to turn the folding hooks per pipe wrench aside and straighten after releasing again - sigh ...
Then, the feet screwed, but the holes were too large for the screws. Luckily my shop is well stocked, so brought great matching washers - because, unfortunately, this was not.
We continued with the suspension of the cross stand on which one stands. This worked quite well, but why riveted on the metal support board wobbles so strong? Ah yes, every 6 rivets were demolished, na no wonder. 6 thin rivets to hold the running board on the carrier? Hope dies last is well known. So Brett removed, drilled and riveted the Nietreste clamping nuts into the supporting framework. Then the board with 6 matching screws M5 together with further 6 washers stable screwed on the carrier. Now does that and I dared for the first time to climb the scaffolding. Test passed.
Why did the article not just sent back? Because it probably should not be anything better for cheaper money. A brand framework of a similar nature will cost just multiples.
Exchange in a defect-free structure at the supplier? Needless, the defects are likely to be the same. Now at least I know that my running board is screwed stable.
All in all I am happy with it. But one should be aware in front purchase, there will be a little work before the first use to remedy the situation in detail. The price / performance ratio but I think well.
