I chance it on my first comprehensive review (including tips to build.): Since I used to play a lot and like table tennis, I found it at the time, with my kids take this recreational activity again. So seen and read at Amazon, then ordered. The table tennis came faster than expected (after 6 days) with Hermes, the announced time frame (10-14 Clock) and with telephonic notice of 1 hr. Commendable. (Caution with 2 man, because package about 80 kilos) to see but was already a transport damage to the packaging between the "feet" of the package directly after unloading. As is also clearly on the package itself, one should take any damage in the delivery note, this is probably a common problem. Further assessment then showed clear deformations and scratches on the frame of the table tennis. (Would have to be on the stand side significantly strengthened) The packaging is good for nothing and were sticking (and bending strength) of the plate frame moves to cans level: Interim conclusion. Because I wanted to use the plate soon, I have assumed (with appropriate endorsement on the delivery note) and then me on a search made for a phone number from the Amazon service. When one clicks through far enough, you will find a callback function that combines a promptly with the service. Situation described briefly and then agreed to a 10% credit (more is not the service, at least that was the statement). I thought it was adequate and accommodating and had no desire to wait for the next delivery. Now to build: The manual and other reviews always go from the building for two out. I have tried it alone and that is also when the assembly organized somewhat differently. First, you need the following tools, which should be readily available: 2 x 19er key, 2 x 10 key, Philips screwdriver (PH2), screwdriver (4mm). Next, you should familiarize yourself with the assembly instructions and assign the numbered bags with the screws to the individual phases. There, it is also apparent where you should work in pairs. If the individual plates can lift alone and deviates during assembly as described here from the instructions, it is also alone. But first you build according to the instructions the base frame with the wheels together. The Schraubenen for fixing the rotating rollers from above put through the frame, otherwise afterwards does not fit the cap! Then fasten on to guide the U-tubes and feet on the plates. Now derogation applying the guidance, the caps on the wheels (the also the U-tube of the plate there is attached) and all those parts (and tool) lay at hand, the above to fix the plate on the base frame and the U-tube of the plate the wheels are required. Then put the plate as described in the manual in the base frame, hold and thereby secure the U-tube. Then secure the plate with the screw pin on the lifting mechanism. This is the tricky part. If you have done that, the plate is again alone and you can rest in accordance with the instructions to assemble the rest. This look carefully at Entriegelungsgestänge. After about 2 hours I was done. The folding mechanism works well, the panel frame is not stable enough and all screws are not V2A what is mandatory in this price and outdoor use, in my view. Also, the network and its attachment acts on rather cheap. In sum, therefore only 3 stars. With better packaging, V2A screws and more stable and higher quality plate frame power I would give 5 stars.