The Profex coatings are made of black foam rubber and have a length of 38cm and an inner diameter of 20mm, which should be sufficient for most Multifunction handle (22mm). Yes, the coatings have as here already repeatedly described bruising on the attachment with cable ties on the packaging. This one can imagine on the product image even if you look at the right side of the coatings. These disappear a little, if you detach from the packaging and only once can be 1-2 weeks. Furthermore, you can also mount the covers so that the pressure points are located in a non-visible area of the handlebar down. Attaching can be the coatings best by previously thoroughly cleans the handlebar, so that no rough spots are more noticeable. Then rub the handlebars with a mixture of detergent and water and who possibly has a compressor, you should first blow in the arm by a mostly lateral 5mm big hole in the handlebar and later where the terminating connection sits compressed air and the other holes (if necessary hold. with help of another person) and then allows the coating's play apply for consideration. Unless you come to some rough spots with the handlebars, or the wheel constantly in the rain (then the Moss rubber stink sometime), keep the coatings actually several years.