After several Pixma models, had a new printer into the house. The printhead of 4700 no longer wanted to just over three years. Full of confidence, I have the 7250 set to a successor, and bought at Amazon The installation went smoothly, but the software is rather inflated, so much is superfluous. The printer driver is less understandable than its predecessors. The easy choice for A4 print between "Standard" and "Photo" was replaced by "fine printing on plain paper" and "Fast printing on plain paper". Only later can also select the paper for A4 photo prints. The handling of the paper cassette is a real highlight. Above only for photos with 10 * 15cm and 13 * 18th Below only A4, whether plain paper or photo paper. The disaster came later. For an A4 photo print I put a sheet of Glossy paper on the stack of plain paper. The result was that the underlying sheets of plain paper was drafted and printed in part or completely with and thus the expensive Glossypapier was spoiled. I have tried five times in a row, always with the same result. That is, in A4 photo printing, always remove the stack of plain paper. Welch ergonomic progress! Before the printer prints, goes after finished configuring the Print, the print command to First 2'25 ". In this period makes the" machine "a pandemonium. Printing takes on A4 photo after all, still 1'20. After printing, it comes for 35s again on the ears before peace reigns. It is positive that the printing quality is right. Conclusion: This printer is a flop for my needs.
