This TV wall mount was my overall third attempt to get my Samsung UE40H6410SSXZG on the wall. At first I thought it must be a two-arm bracket, because only these my precious TV can keep stable (that with 8kg is a real lightweight in my Samsung, I realized later). However, I put the "edge" which is on the back of my unit, with major challenges: the first two-arm wall mount did not fit because the struts were too long. That might have fitted with approximately 1000 washers, but they would have been up and down. Then I resorted to the (previously purchased and then used as a last resort) Ikea wall mount. Besides the fact that the device is then as close to the wall that you can not even just replace the cable and scart cable can not attach until I had to try because with the washers construction. And even though the braces are comparatively short, I had to move up because of the projection, which is why top looked a bit off the screen. Finally, I have not given up and ordered the Invision wall mount - and am completely satisfied. We must not be deterred from the great weight but the holder itself and the initially seemingly nonexistent mobility. Once the bracket on the wall, does it all well.
I decided to write this review because I myself eeewig "researched" have been looking for the right wall mount. Above all, I hope to be able to people whose TV has a similar projection on the back to help, so they will not - as I - a supposedly (VESA specifications fit always) order right bracket after another, and then on end short to stand in front of a nervous breakdown. It was also here not necessary to purchase any screws to. My Samsung needs M8, for mounting this bracket M8 25mm (I have to better grip even made a washer under it, I'd still there). Dowels and screws for wall I have taken their own, but the supplied's have certainly done