Important to know: These films are designed for light textiles - so knows best and only for InkJet Printers.
If you should really ask yourself which side is printed - it is the white side without the Avery Print ... Have you taken this entry barriers, it is no problem to make really cool shirts and other textiles according to your wishes.
Scope of supply:
Come here 10 sheets A4 Textile foil that make a very valent impression on me. Included is also a legible and detachable manual, are listed in whichthe individual steps, as is the link to the home page and the design tool.
Printing / layout:
Printed I have with a Canon Pixma iX printer with genuine Canon cartridges in the settings "T-Shirt Transfers" and print quality to "HIGH".
When my printer T-shirt transfer means that the image to be printed is equal mirrored - ie either your respects when creating the design immediately afterwards, or your printer supports it out of the house.
If neither is possible, you can surf to the site and upload there by AVERY online design tool, the graphics and editing - and also choose from a large pool of shapes and clipart.
If your design is then available and is printed, it's time to apply the films.
Assem (r) ügeln:
So therefore, it is equally clear: These films need heat and pressure. Heat and pressure - Both - but both in moderation.
The iron your presents on cotton or shortly before MAXIMUM, but just not quite up to Max.
For the underlay it is best, you have a hard table or a floor, on your applying a sheet (taken twice) or a pillowcase (taken twice).
This document your irons on 2-3 times until no wrinkles in it. The shirt / garment / WHATEVER your ironed please arrange times over also 1-2 - also wrinkle free. The textiles must be clean & dry!
New shirts should be washed according to the manufacturer's instructions 1x previously, I have ignored, of course - is nothing happens ...
And then you positioned your print to the right place and puts gentle pressure going on for 10-15 seconds, then significantly more your exerts force, especially at the corners and your ironing a whole page about 3 minutes!
Care - the paper must not discolor or turn yellow, then the heat is zugroß or you have the iron can stay in one place - this is wrong. Always nice from left to right, to the left, to the right - PRESSURE!
Are which is 3 minutes around, you let the shirt still 1-2 minutes to cool down, mostly already a corner at the shirt at this time goes up and you can then peel off the paper carefully.
The result for me is impressive really, the film has a kind of "gumming" incorporated into the fabric. The design has been given a noble shine and the colors shine!
Now you're done and proud owner of a unique piece absolute.
This you should ask gently wash (30 °) and not throw in the dryer, then you have taken something out of it.
Me have the films convinced I'm going to use these films more often now, and can you hesitate to recommend!
PS: It's great fun, friends even a "handmade gift" to hand over.
Photo from the shirt I add here with a! Hope to have helped!
