* Pedestal made of cast iron
* Folding feet in steel rubberized with manometer
* Standpipe steel
* T-handle made of wood
Screwed * High-pressure hose
* A valve for all common types of valves (Schrader, Franz. Valve, Dunlop)
* Due to the slim pump body can also be high pressure (> 6 bar)
cope without call values exertion
All parts can be ordered as a spare part of SKS.
Below neg. Points struck me, but what I want to forgive no penalty,
since it does not detract from the real task of the floor pump:
* Due to the slender pump body only a small volume leaving the pump, then
some of pump strokes required to achieve the desired pressure
* Special valves for airbeds or balls are not included
* Since the valve are tightly hold at high pressures, the locking lever on the valve head is stiff.
Tip:
In car valves the pump head carefully centered and not too deep about evert, otherwise you will bend the steel plunger which opens the air supply valve at the car.
If the plunger yet again bend, so you can simply disassemble the pump head and bend it the plunger again.
