- Charger
- Cable with Euro plug
- Connector for connection in car
- Guarantee promise for lifetime warranty
The additional connector for charging in the car is not bad, especially when making the children resulting from extensive driving the batteries limp, making it the family peace rescued.
There is no separately printed manual. What you should know is on the packaging, but only in English and also quite scarce.
Style:
*******
The Design of Digital Charger F02 is quite clunky, rectangular and not particularly elegant. Back of the head are connections for the power supply one for the car and a plug for the Euro plug. On the front two slots are for receiving the batteries. So two can be loaded concurrently. The power supply is integrated in the device. Each is about the two shafts to a charge level indicator with three yellow LED. There is a USB port on the right side.
Operation:
**********
The instructions for this is available in English on the packaging (not throw).
For those who can not speak English here receive the translation:
Instructions for the charging process:
A: When the plug is inserted into the socket and there are no batteries inserted, then blink all 3 LED.
B: The three LED displays normally blink to indicate the charging process.
the first LED stops flashing and lights up continuously, thereby indicating that the battery is charged to a third
the second LED stops flashing and lights up continuously, thereby indicating that the battery is charged to two-thirds
the third LED stops flashing and lights up continuously, thereby indicating that the battery is fully charged
Einstellmöglichgkeiten you have the charger no. The operation is therefore quite simple. Inserting batteries and wait until the charging is completed. The charging process itself is very quiet by equip. Beeps, there is no, even greater heat generation can not be determined. This is probably because that the delta voltage U control strikes quite early and prefer a little earlier charging terminates the AAku vollzupressen than up to the neck. Opposite my BC-700 batteries are charged only about 85% of capacity. Maybe you would have here are not to renounce an additional temperature monitoring of bays. Then one could have fully exploit the capacity of the batteries.
On the downside, the side-mounted USB port is not explained properly and causes confusion. Normally, one might assume, when the power cord is plugged in, you'll actually quite normal to charge the phone via USB. Unfortunately, this is not the case. The connection remains in the printer is plugged without juice. Well according to the description is here used as the charger Power Bank with inlaid full batteries / accumulators. At my trial with AA batteries or AA batteries also brought no success. Maybe there really is only possible with higher capacity batteries as 18650 with 3.7 V. That should lt. Question / answer have works. Since this function does not work or is not explained properly, there is a star deduction.
Conclusion:
*******
Good charger which Li-ion and Ni-MH / Ni-CD batteries can with up to 0.5 A load quickly. Batteries are not hot, but are also loaded with only about 85% of capacity.
Looking for a small and lightweight charger with only 157g weight, which both Li-ion and Ni-MH / Ni-CD to load batteries, then you can not go wrong here. To use the function as a power bank, you need at least one anscheinen 18650 3.7V battery.
Technical Specifications:
*****************
Model: F-02
Country of Origin: China
Branding: Foxnovo
Compatible with the following types of batteries (lt. Packaging)
Li-ion: 26650, 22650, 18650, 18500, 18490, 18350, 17670, 17650, 17500, 16340, 14500, 10440
Ni-MH / Ni-CD: AA, AAA, A, SC, C
Microprocessor-controlled control
Delta U switch-off (for Ni-MH / Ni-Cd batteries)
CC-CV (Constant Current Constant Voltage) for Li-ion batteries
Input: 100-240V AC 50/60 Hz DC: 12V
Output: DC 4.2V + - 0,08V / 0.5A + -80mA * 2
DC 1,48 V + - 0.02 V / 0.5 A + -80mA * 2
DC 5V 1000 mA (USB)
Size: 13 x 3.5 x 7 cm
Weight: 157 g (itself measured with Euro plug)