... Snip snap ... SIM card!

Castrate SIM card funzt very well with these cutter here. But it can still be a problem, because not all SIM cards are the same. For example, the old SIM cards a little idea are thicker. This does not fit into the card slot of a few smartphones of the new generation. For example, the HTC One M8 and the Acer Liquid E3 it does not fit. Unless you squeezed the SIM card purely by force and the one then never gets very likely back out without tools such as tweezers, Flex or Greifzug.

But here you can remedy be managed. Simply the SIM card via a small needle file dragged back and forth until it fits. Definitely it the eighth page edit on not sitting the chip.

Who has its prepaid card in Nokia 9300 uses the first series are allowed this problem but not haben.Denn here had to be strangled anyway purely with brute force the SIM card. Few times in and out and the SIM card was good sanded and trimmed. May very well remember it still. 2 times in and out and the O2 logo was no longer visible. Pinched it has fortunately only on the top of the metal cage and the chip remained intact!

Punching on Micro-SIM format works with all cards. Even with the SIM card of the first generation. Not that Cutten on Nano-SIM, because the chip is significantly larger and breaks the Cutten.

The stamping itself is no problem with this Trumm here. It is necessary with a fine file to remove definitely the ridge!

Would advise first time to test with a SIM card that you no longer need. Had me some time ago another Cutter bought. Who has broken down during punching himself and the SIM card with the same. The looked like once shooed through the shredder!