Solution for new TV sets with 2-point mounting of the foot

Bought us for Christmas a new TV. The device is available in a wall unit and is therefore limited in size to 90cm width. Due to the recently very narrow frame The excellent device has a 39 "Panasonic but still fit in. (!) But has no truck. According to the service of Panasonic, a new EU directive is to blame, that the television all future will have a foot which has two attachment points - duh In our case it is a chrome bracket, approximately 52cm wide and 22cm deep, with which the device is no longer rotate when the device is in the wall unit are therefore the left.. outside existing interfaces (USB, HDMI, SD slot, CI +, etc.) to which you often have a go must be in operation, no longer accessible. The same applies for located right behind the main switch of the appliance to. Thank you to Brussels.

The black glass turntable of Hama, the (almost) perfect solution. The 11.5kg heavy equipment (with 39 "slightly larger than actually specified for the turntable) is securely on the smooth and visually good looking turntable. The TV set is pivotally connected to the turntable in the cupboard on the left and the right by about 45 degrees and it now reaches the aforementioned controls (the depth of the subject should be given a width of about 89cm of the unit at least 50cm) criticism:. The bogie, however, appear as too easy - the "pressure" of an antenna cable's enough of in order to change the position Nevertheless, many thanks to Hama..

The 22.12. ordered turntable was by DHL 24.12. delivered. Although the glass turntable was delivered only in the original packaging and without additional overpack, everything was intact. Thanks to Amazon and DHL.