Setting indoor unit at rest
(1) Date and time
Press the "key" 3 seconds to bring up lheure and date. Set each digit by moving ugly keys "left" and "right" and set to the correct value of ugly buttons "up" and "down", the selected numbers are highlighted and
(2) Select melody and ringer volume
Press once the "key" button to select the melody ugly keys "left" and "right" and adjust the volume with the help of the "up" button and "down" then.
(3) Adjusting the door control time (lock delay)
Press once the "key" button and then choose the time that will be sent the command for opening the ugly gate keys "up" and "down" (1 second should be enough), then double-tap the "key" button to exit the setting mode.
Setting indoor unit in conversation with the camera
Adjust the sound volume of the conversation ugly keys "left" and "right" and adjust the brightness of the screen with the help of the "up" button and "down"
Call of a visitor and open portal
Lorsquun support Appeals visitor on the button of the outdoor camera, he hears a beep and the inner ring and display screens what the camera sees. On the first screen that comes lon, 2 actions are possible:
(1) Push the "telephone" key to communicate with the visitor, possible support on the "key" button to open or close the gate. Another screen can then only see the visitor. A Pressing the button "phone" ends the connection and puts the screen in standby mode. Another screen can then take control under the same conditions.
(2) If not nintervient lon or lun on the other screen within 30 seconds, they move back into standby and the connection is interrupted.
On the screen, to switch from standby mode to off and vice versa, press 3 seconds on the pusher located on the edge of the screen, right.
It is possible to simulate a visitor to view the outside or order the portal:
Press 2 times on the "visitor" button inscription "connecting" will pop up and the system is found in the above situation. Control possibility of support through the portal on the "telephone" key. Back to support by standby on the "visitor" button.
Take, view and delete pictures
(1) When the screen and camera are enabled, supporting the "photo" button to stored image.
(2) When the visitor on the support Appeals camera button and unanswered dun screen in 8 seconds, a picture of the visitor is taken and stored. If the pictures of storage memory is full, the new picture takes the place of the oldest.
(3) To view the saved photos, press and hold the "photo" button and load pictures ugly keys "left" and "right". Supporting the key "photo" offers a choice to delete the displayed picture (Y) or not (N) or all pictures (All). Exit by pressing the "telephone".