After turning on the effect was somewhat different than expected, the entire area behind the TV was more enlightened than bright, much too bright for our taste, almost garish and not suitable for relaxed TV. Another problem was that the LEDs in the rear of chrome colored stand reflecting very strong and strong hidden, an absolute no go.
Next we have the bar located on the lower side, results were still too bright, mirroring is still present in the base. The reflection also came from the bars above and on the sides.
In the next step we have all Stripes carefully removed with a knife and re-attached in substantially reduced formation. The adhesion was still given. Final Solution: 3x 30cm above 1x 40cm each side. The reflection in the base we get away through cover with a piece of cardboard behind the TV (of course, for the viewer not visible).
With the adjustments, the result is now top. The lighting is subtle and very pleasant. In stand no more reflections can be seen.
I think at the end we would also come clear with the small set. The wall does not reflect, one could with us anyway with the set certainly a 2m equip screen))). But that can be difficult to assess in advance. As it stands now, we are very pleased with the backlight in any case. Replacement strips are more than sufficient after optimization.