Super Slide - through to precision cutting hardly possible to apply

Laser cut a plastic film is certainly not: D because otherwise you would have a plastic lump in his hand.
The blank is cut down to the 100th of a mm. This one application is extremely difficult because at minimal inaccuracy in placing on one or more edges of the sheet rises. This to prevent is actually not possible, unless you are lucky or a robot. I did manage to dispose of the first film applied perfectly the 2nd sheet of 3 edges. On 4 left margin it is now somewhat. Good that I use which covers this edge a Case.

The film itself is otherwise very good. Fingerprints smudging a little less, the finger slides very well on the material and the best part is the anti-reflection which is outside unbeatable. Because a display can still be so bright when it reflects outside one sees hardly anything. With the film it fun again to use the device in the sun. A single mm less in length and height and the film would be perfect.

Small drawback is that is easily grieselig by the AR coating the display. But that is not to be avoided because of the anti-reflective coating. The high resolution of the N7 2 still remains properly visible.