Mounted is a 65 "big Telefunken LED TV (weight about 37 kg). Attached the bracket is mounted on a plasterboard wall that is directly on a particle board. The wood screws hold without plugs etc. very well in the particle board. As a test I have before drawn mounting the TV on the bracket and then me completely drangehangen (about 90 kg). The holder kept me from easy.
Had this not behind the Ripigswand, one could also work with cavity wall plugs for plasterboard (eg Fischer HM 6 x XYZ -. I have used for the fastening of my 20 kg Center Speakers + 6 kg mount to a point where the drywall was not backed with chipboard). The metal dowels hold up to approximately 20 kg each, so that bracket and TV usually with 4 screws find more than enough support.
Move allows the holder very good (at least with the leverage of a large 65 "TV :-)). If you put on according to the screws before assembly, it also notes the different setting positions. Since I personally, however, not always the TV new organizing, but simply prefer and back sliding when I (in exceptional cases) the wiring change, new devices connect, etc., I have both vertical and horizontal adjustment of the front mounting plate prevents (screws tightened fully fixed for these adjustments).
The installation of the bracket on the wall is quite simple. The distance of each screw is sufficiently large, also for installation on a plasterboard wall. Thanks to the three respective adjacent slots and the holes can be slightly offset, so you "dodge" cables can, if necessary, still arrives at the stand behind the wall without having to shift the position of the holder as a whole. After mounting the TV is simply hooked into the holder. This makes installation of the mount and the TV huge (had previously not recommended on a smaller 32 "TV a holder to which the TV had to be bolted directly. Very cumbersome assembly and particularly heavy equipment. This has the herein described mounting CLEARLY better solved).
For very small models I would not recommend this bracket. The TV should already be at least 50 x 50 cm, so that the holder also completely disappears behind the TV, otherwise you will still over parts of the holder, under and to the side of the TV could see.