I will confine myself, therefore only on the essentials to help other customers buy one divorce.
The bracket is absolutely stable, and served its purpose fully. I would not have thought it possible that you can attach as stable, and easy tilting and turning an up to 37 "TV at a 90 degree angle to the wall by means of wall bracket (ie no ceiling holder but has more hospital room character). There are actually 5 star.
Whoever copes with Ikea image guidance, and also very precise, 10mm (!) Can pierce thick holes in the wall without slipping even a millimeter, can venture to the assembly. A good, strong impact drill is mandatory. All others I would advise against the self-assembly. (Possibly looking at MyHammer.de Help)
There are some inconsistencies in the assembly, for example, a black plastic part (V) which, according to Ikeabildbeschreibung more than 20 kg in addition between the support (F) and swing plate of the arm to be inserted in TVs. First, I see absolutely no reason why this plastic part might affect the holding force of the overall design in any form, also fit the holes in the plastic part (V) is not with the holes of the series 2 and 6 of the 90 degree option together. Plastic part (V) is simply too short for the 90 degree option. Should it be omitted? Furthermore, it must for the 90 degree option part (U) transferred to another hole. have lots of fun with it! Which brain probably this Kontruktion has sprung? Here go alone easy 20 min additional assembly time on it. This part could have been somehow displaced by clicking mechanics, or know how, to construct, but not currently solved as of the bird.
The "long holes" of the base plate are not just long, so that the necessary tolerance for displacement is missing, and even if the drill goes even a mini little piece during preparation, you're unlucky. Result: new attempt, 4 new holes, plaster for the old holes, and the wall bracket is seated 2 cm higher, lower or the left or right from the originally selected Idealort.
The plastic caps are, geich infected on the support rails which are bolted to the TV even in the 1 step of the instructions, you have at the end abfummeln again, because one has to lock the click closures after hanging the TV by a respective screw (L). Then, when the TV is once clicked, you can see the plastic flaps at least for my Samsung TV not reattach.
2 star deduction for bad assemble due to "faulty designs" and poor installation instructions. Incidentally, there is an assembly video on the website that bird but on the essential points and not received, and even the 75 degree swivel variant covers, but there is but this one video there in 6 different video formats. Better assembly instructions would be helpful.