50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
The rims stand is not bad per se. Problem are the feet !! Have I made four extensions off and now behold the upright keeps the tires without which he is shaking! Would it now that I've done it so buy again.
50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
A very shaky. The too short feet and the assembled tubes do not give the necessary support. Have launched 4 wheels 225x18. We must not turn to come. The stand must always be installed on a wall or other stop giving background.
50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
Have long after a wheel stand that can accommodate larger dimensions wanted. Unfortunately, I fell on this one. My winter tires (245/18/35) with virgin new rims I have it stored for 2 months. One morning I enter the garage and see the rim tree topple
50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
The load specified by the manufacturer is insufficient for the intended tire width! Mir is the lower connector (plastic !!!) after eleven months broken, without the wheels were changed on the rim tree. And although only 2x and 2x 285er only 255mm whe
50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
Have 2 purchased by these rims stands; One with 265/30 9x20 "wheels and 225/35 with a 8.5x19" wheels. Tires are not aufeiander and tight. Rims tree is also very stable and can not tip over without major trauma. The tree was set up quickly, howev
50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
.... What it promises ...! I have long wider rims / tires sought in the local shops for such a stand for (something) and then resigned. I then searched here and found at Amazon thereafter. The rims tree is stable and keeps loose the four complete whe
50207 Cartrend Wheel Stand XL, to 285 mm tire width (Automotive)
The base of the stand is on 4 relatively thin 30 mm rectangular tubes. These are pushed onto a plastic cross and fastened with a screw top. The 2-piece tube is simply plugged together and inserted into the plastic bracket on the foot. Then gradually
