Canon EW-63C Lens Hood black

Categories


  • Steulichtblende Canon EW-63C  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Lens hood has a relatively poor fit, even for storage on the Objektiv.ist it is difficult to fit. Is a bit disappointing in original ............................................. .....................
  • too expensive for a bissl plastic  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    So sorry, why you have to buy extra a GeLi with Canon lenses? I have still not understood the meaning behind it.
  • a point deduction for the price  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Sometimes I wonder, what with the camera manufacturers actually make their money - with the cameras or with the accessories. The stable and precise sunshade Canon EW-63C Plastic does indeed what they want. But I'm sure as an among accessory can only
  • A good addition to the lens  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    An excellent stop. Sits very well on the lens. The attachment is not complicated. I highly recommend this very panel. Limitations of photography are not recorded.
  • Rather wobbly affair  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    At first I wanted to send it back because I had the impression that the panel did not fit on my lens. However, I realized it is not screwed but only plugged and easily "tightened". After that, she does not fully seated but still wobbles hap
  • Does the job, just like any other lens hood also ..  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    ... But offers this original model from Canon with a sensational price. Whether the original is worth the price, everyone must decide for themselves. I, however, would not again spend so much money for it.
  • cheap plastic part for salted price!  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    For the 20cent Plasikteil to take 20 euros is quite cheeky. Function and handling is Ok. Fits well and is easy to screw on and take off. But I think that it would have done a NoName for 4-5 Euro. For the rip-off I do not give more than 2 stars.
  • Expensive but original  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    The lens hood EW-63C for the EF-S 18-55mm lens from Canon STM fits naturally wonderful on the lens because it is an original Zubehörprdukt it. The panel does what it is supposed, is easy to assemble and if it is not needed, this can also be flipped b
  • Apart from the stately price the aperture is fine.  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Aperture is convenient, it can also be mounted upside down on the lens. This saves space in a camera bag. Price could be customer-friendly.
  • Good but expensive  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    From the hood I'm begeißtert, it fits wiggle or terminals very genau.Kein. Four stars only because I forgive the slightly too high price.
  • But grossly overpriced at a musthave  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Yes ... I have to admit ... when one considers times in mind that you spend 12-15 euros for a 10ct form plastic-part, I have to beat against my forehead really hard. But I wanted to time my Canon lens aperture have a Canon ... Other pay also prefer 5
  • A must on the kit lens!  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    The Canon EW-63C is designed for the new STM variant of Kitobjektivs. I ordered from the very beginning always with you and you with my camera. Scattered light looks at pictures just terrible. With the lens hood the pictures in unfavorable sun do not
  • Good Streulichtblende  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    I recommend anyone with an Canon 18-55 IS STM buying a lens hood to the front lens from scratches and natural side Lichteinstreuungen protect. Whether it has to be the original of Canon, of course, is a matter of taste. This diaphragm sits anyway ver
  • Super accessories  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    The lens hood is well made and fits like a glove. It sets the aperture to the existing marking in alignment with the second mark on the lens. A slight, but decent rotation by 90 ° and the panel snaps and budge. Furthermore, one can these with the sam
  • Lens Hood EW-63C  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Perfect GeLi for EF-S 18-55mm f / 3.5-5.6 IS STM, STM note !!! Intended for this objective and just as suitable. Understand the different opinions, because it is not recognizable in the item description. However, if you value genuine accessories just
  • It fits and it does not fit yet ...  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Unfortunately GB comes back again, as it does not fit, it was not immediately believe, but now I know the reason. What is puzzled that there are two of Cannon lenses are very similar hot, but not identical. Canon EF-S 18-55mm f / 3.5-5.6 IS STM = Len
  • Canon EW-63C Lens Hood  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    The Canon EW-63C Lens Hood is doing what it should. Perfect fit, keeps out stray light, produces no vignetting. Only negative: You have to buy extra. Find it somehow odd that at the most reasonable lenses are no baffles while ...
  • Conon EW-63C  

    Canon EW-63C Lens Hood (EF-S 18-55mm f / 3.5-5.6 IS STM lens) (Electronics)
    Got the Conon EW-63C Lens Hood for my EOS 20D (lenses EF-S 18-55mmm f / 3.5-5.6 IS and EF-S 55-255mm) gained fits both properly Super matter