Kaiser Lens Cover "Snap-On" with

Categories


  • Better than the original 21  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    I bought the cover for my Sony Nex 5R. When the lens 18-55 "plastic springs" were broken. This cover makes a much more stable impression than the rickety part of Sony. And it even fits in spite panel. The band is also long enough. Now I fin
  • modern Deckelchen - for waste glass 1  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    Bought for me this M42 old glass Deckelchen. Price was fine and even with ribbon. The traders learn it apparently slow that missing tapes cost points and damage its reputation ... ;-) On the other hand - the ribbon was once again the first thing that
  • Well done 9  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    The cover is well processed and fed snaps. The cord is sufficiently long enough for the 18-55 and 55-200er lens when mounted to the left carrying eye. Price-Performance I like that, only gripe if you can call it so is that the Sony original cover
  • Good for Sony RX10  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    I bought this lens cover for Sony RX10, because I wanted a spare protective cover with cord - the original cover can be fixed no cord unfortunately. Against this cover I had a protective cover from Hama concerned, but which (for the RX10) proved to b
  • OK, but can be a bit tricky at times  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    The cap is well built, but the cord can get in the way When putting it on - so be careful. The closing system where you squeeze the bothsides can get a bit tricky and it might take a few times to really close it down properly. When I lent my camera F
  • suits 1  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    after my original lens cap my Sony NEX5 lost I bought this on Amazon it fits 100% and thanks to the small band he can no longer run away I can recommend him
  • Very satisfied 398  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    P P asst erfekt W ithout Z u W ackeln
  • The is not lost!  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    Did I chewed this lens cap to replace my Sony NEX F3 after me the original cover on holiday has come "lost". When taking pictures on vacation I have solved the cover, of course, he is me slipped from his hand and down the slope gekullert. ;
  • Works as promised, band too short  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 67 mm (accessories)
    The main function as a lens cap is properly fulfilled. The lid fits on the corresponding lenses and remains securely in place. The backup tape is much too short - at a 50mm fixed focal length like funktioneren the whole, in a zoom lens not.
  • Bit fiddly 1  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    I have this lens - cover bought since the original on the Fuji X100 / X100s does not fit if you have mounted the lens hood. The cover fits well and keeps reliable. The fitting is somewhat fiddly. The handles, with which one puts on the lid, or in the
  • Better than the original 22  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    The handles for taking off and putting it seems to me much better because more clearly structured than the in the original lens caps Sony (NEX 6) is the case. Therefore, the handling is easier. The seat is just as determined. In addition, the lid can
  • Lens Protection for Canon  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 77 mm (accessories)
    Protective cover for Canonobjekiv is fine. The safety line should however be slightly longer. Now I can no longer move the lid.
  • sits at least not at Cannon 100mm macro properly  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 67 mm (accessories)
    I bought the Canon 100mm macro with this lens cap. The lid broke up very often from the lens, so that when I took the lens out of my camera bag pack the lid almost rarely was on the lens. He also can be attached to the lens only with accurate attenti
  • Lens Cap for Nikon 18-105 lens he  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 67 mm (accessories)
    I was looking for a lens cap with tape that it can be attached to the camera / strap and I is not lost. This lens cap for my Nikon 18-105 he's very good. He snapped a good and safe. The sun visor does not bother. The tape / cord is already pre-attach
  • Attention no black cord available.  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    The product description is obviously flasch and misleading. A black cord to secure the lens does not exist, although it is self-displayed on the packaging. Article immediately returned!
  • A lid and no longer!  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 77 mm (accessories)
    The cover (77mm) keeps very well! But that was the only good news. Unfortunately disadvantage are three points: 1. The beige supplied tape is extremely short and never fit in a lens with lens hood. For this it is not made of rubber and somewhere must
  • Lens Cap 1 1  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    The product offered corresponded all my expectations. The closing accuracy is excellent. Excellent fit for Pentax zoom lens. Delivery quickly and completely
  • Canon EF 24-70 / 2.8, EF 70-200 / 2,8IS II  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 77 mm (accessories)
    Sitting in these two lenses good, sympathetic of closure, despite an attached sun visor can be reached easily (with fingers centered instead the originals only side accessible with your fingers). The tapes I've taken, that bothers me the Herumgebaume
  • Fulfills protection  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 49 mm (accessories)
    The lens is protected by this cover really well against mechanical shock (eg fingers, sand grains and other items), because the lid is firmly on the lens and so can not fall off unnoticed by the good clamping action. Furthermore, not rattle the very
  • fits well, fits perfectly  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 67 mm (accessories)
    Makes a very good and stable impression. Perfect fit, super close and still. The cover can be opened very good and close. The threading of the line took a bit but that was probably more a my "sausage fingers". The string could for my "Nikon