DSL modem dialogue Encapsulation Mode = VC / MUX VPI and VCI = 8 + 36 =
Dialogue ROUTER: IPOA Protocol: IP over ATM:
Your IP address: XXX.YYY.ZZZ.NNN
mask 255.255.255.0 or as displayed IP / mask XXX.YYY.ZZZ.NNN / 24
Gateway (Gateway): IP address by replacing the end 254: XXX.YYY.ZZZ.254
FREE DNS: 212.27.40.241
FREE DNS: 212.27.40.240
The IP address is on my account [...]
In fact, the setting of the couple [IPoA / VC-MUX] is not possible from the installation CD (which to choose VC-Mux but that does not offer IPoA) or from the Quick Setup of the admin interface (which offers IPoA but with LLC encapsulation). IT must therefore go directly to Network -> Settings Wan, erase all that has and do "Add" to create a new connection. On this page, we must first learn "Connection Type" by putting IPoA THEN (the order is important) back on the "advance" portion of the ATM configuration to select VC-Mux (if you do the opposite , LLC is re-selected by default) .. and I finally internet access. Thank you to the TP-Link support for the solution.
Good Config.
