The first impression was very positive. Thin elegance.
The initial setup went smoothly. The instructions are clear and well drafted.
Now for the negative:
The remote has very small keys and only works in the immediate vicinity of recivers.
Already on the third day no TV reception was suddenly in the middle of operation is possible (no signal is found). After checking the connection cable and the antenna, the problem could not be solved. We have again started the automatic station search, unfortunately without success. Again and again the message 'no signal found'. After speaking with the service hotline of the company. Axdia recommended the machine to 'factory settings to reset' and start the search again. This procedure was successful.
Unfortunately, the described problem occurred since then to three times. Again and again the device must be reset to 'factory settings' and the search restarted. This already occurred twice that only 2/3 of the available channel is found and a new scan had to be started.
Regrettably, this is not the only problem which arises.
Operating the device with USB mass storage media also makes problems.
It already occurred several times that during charging of the selected film to the device, unfortunately, has returned to 'search USB' but after that no film has been loaded. The device reports indeed '"Initialising"' but then switched after a long wait again on 'Search USB' back.
As a precaution, it should be mentioned that only files stored in the same format on both the external hard drive with an external power supply as well as on the USB stick. After 'Reset to factory settings' he realized then but the selected movie, but the unit had (Sort models and delete) are again completely refurbished. In addition, surprisingly, the films a storage capacity of 1.5GB exceed not be played. The device aborts the film and invites directly the subsequent film. It is not possible (except on the PC) to watch the end of the film.
The device is not usable. It is a single offense.