Again a USB 3.0 card reader - this time small and inexpensive.. Controller chip GL3220 Genesys was used here locig, I like that Wiel now I can read my old Sandisk 30MB / s SDHC cards with 30MB / s u. Disks. And GL3220 there is a driver of Genesys (Tip: visit Hama.de), which makes it about 10% scneller than Windows drivers. Delkin Elite 633x SDHC gave with CrystalDiskMark 3.0 following benchmark: 93 MB / s read and 79 MB / s write, with Sandisk Extreme Pro SDHC, there were 47.6 / 46.3 MB / s..
Plus:
- Small and easy.
- Extreme SDHC old recognized 30 MB / s from Sandisk
- Driven turbo drivers: there is nothing quicker!
Aufgeruestet for CF cards with UDMA 7 -
- Mechanical equipment very clean: SDHC drive is smooth
- USB 3.0 connector give a good impression, cable goes nich going to light as usual with Micro-B
- Very good value at the moment
Minus:
- Cable is only 58 cm long
And with card readers, there was an indication of Trancend RecoveRx v1.4 software. Did the load on Transcend Download site and tried. I had a Toshiba SDHC Class 10 8GB which was already several times in camera, and then the images were just deleted. So I tried RecoveRx: very easy u anwenderfreunlich it should be and this time there was no Entteuchung:. This is a real "Portable" Program, decipher only ZIP file and start exe.. In about 8 minutes I had 502 photos (4,1GB) format .DNG u. .JPG On my HD, all were genuine u. Good! RecoveRx also features format and Protect. Format DLL has its own so it brings forward nich Windows format as many other recovery programs - perhaps good for SDHC cards. Only downside here is that the name of Kartes is always exchanged as TRANSCEND!