It therefore makes a lot of sense, the current manual from the Smart VX10 / CX10, February 2012, to load and read, especially the incomplete manual of Volksbox from 2010.
Update software V1.31.1.230 from March 2012:
One can verify that the HD + Card has been activated. Who does not want to use the HD + card, it is out of the unit when an LNB is connected! The activation starts immediately at the reception of HD + transmitter.
Network:
The HbbTV functions are well used with the remote control when the Internet connection is fast enough. When connection problems with the network, the receivers remain often hang off a remote control is then no longer possible.
For Internet access, the processors too slow and the operation via a remote control are too cumbersome. Anyone with Internet access (not HbbTV) requires at his TV screen, should think about the use of an additional small notebooks / netbooks with wireless keyboard / mouse.
Privacy:
After a factory reset, the IP addresses and the wireless password remain (in plain text or encrypted?) Stored. What is needed is a Factory Reset, see comment 1, which is explained in any manual!
Remote Control:
Size, operation, range - IR reflected at room walls; very fast reactions in the menus.
Radio operation without use TV:
A switching on the device and switching to radio stations (starting mode Lobby, adjustable, on the eighth display) is possible without a TV with the remote control.
SD and HD picture:
Very well
Operating Principles:
Total - with a few exceptions - conclusive. EPG (Guide) for TV and for radio stations; Auto Scroll longer texts. There are almost all menu items on top of the TV screen help texts.
Recording / Timeshift:
Recording a current program (TV / Radio) Timeshift or with one keystroke. A timeshift recording can be saved by renaming the file.
Lock and Load Settings / Update:
About USB stick.
Channel List:
In the menu under "Manage channel lists" all lists, including the default list, deleted or sorted:
Select one or successive stations with the green button (channel Mark - Mark the end - cancel with Back) and then simply move with the arrow keys above and below the OK button. With the P + - keys, the channels are displayed page by page changed. An erroneous numbering of the Radio list could be corrected by the export / import on a favorites list.
Display:
Longer information (channel no. + Name + transmit additional text) are displayed as a 2 x treadmill, then is positioned at the beginning of the station name. Learn more about TV program, recording active / planned, etc., are visible in very small display segments.
Standby adjustable:
Ecological: consumption approximately 0.7 watts / h (start time 30 sec.)
Standard: consumption approximately 3.7 watts / h (start time about 1 sec.)
In operation - no recording / without HD + card - consumes about 15 watts / h.
Programming error:
Can be found in the forums:
invertoforum: Inverto Unofficial Support Forum
satellite ULC: Nachtfalke satellite Board