I have connected the receiver to a 8404 Philips. One should as already mentioned otherwise take care, that the receiver only works on Philips equipment, but then also using the remote control of the TV is completely controlled - it must also, as supplied no separate remote control is provided. The installation is very simple, simply insert the following Quick Reference Guide the enclosed USB flash drive for data transfer and add the receiver as a new device and then he is ready for use, costs comprise only about 4 minutes. Included is a device that is glued to the TV back and the receiver will only plugged the cables from the satellite system and the power adapter you can plug in the cable guide on the back, the supplied HDMI cable is so short, it disappears at the back - so you can see really only TV and nothing else. Only the switching times are less than optimal, although you do not have to wait too long, but my old digital receiver was clearly Zapper-friendly. For this you will then as mentioned comforted by only one remote control, the TV automatically in sync with the other the receiver on and off. I am absolutely delighted with this elegant solution, without the wires and devices in the field of view. The signal is also excellent and superior to any integrated device in my eyes Thanks to HDMI.