The provision is in fact not so easy, but this is in most films of the case. Here is my approach, as we have made it relatively easy (without a single bubble!):
- Instructions ignore! First, one should the outer film (actually "2") remove as they only proposes and irritated waves during application.
- Area have really dust-free - ready hold a cloth that is really no dust when wiping leaves (even Brillenputztücher are actually unsuitable).
- Film kept as horizontal and close to the tablet (thus during the process to little dirt on the surface is falling!) And beginning to apply the protective film at the edge. Always bear in mind that no dust on the surface is - work best in pairs: one glued on, the / the other keeps the surface in the eye and wipes the dust grains forcibly occurring (breathing (), air turbulence!) Away.
- Film roll slowly (while the peeled film ("1") should not come into contact with the surface of credit cards or similar use squeeze to blow..
- Should nevertheless times a speck of dust appears on the edges, you can emphasize to the outside it with a needle or a scalpel. Dust grains in the middle of the middle of the process, however, are hard to remove in my opinion, without causing any more damage (because the film sticks and the surface is static is even more dirt to).
The application took about 15 minutes with us, but it has been worth it!
