Positives:
- Absolutely understandable, meaningful and readable without a microscope manual
- Device by default set to km / h and 24 hour display
- Processing makes a good impression, from experience (rain) water resistant
- Easy to read and icons diplay in really sufficient size
- Any mounting equipment while including 6 cable ties.
- Growing both handlebar and stem on possible description in BDA
- Widespread and therefore very inexpensive CR 2032 battery
- Warranty 2 years, except for the battery. Is handled by the seller, no problem for me, because and sold by Amazon.
Negatives:
- Absolutely nothing for my requirements
What perhaps should look out for:
- At least on my machine there is no contact from the magnet to the receiver came with exactly centric orientation. Substituting the magnet but slightly above or below the centric of the receiver on, everything is fine.
- By design on the mounting of the sensor via cable tie is not 100% fixed connection. I have applied to find the optimum alignment position both at the sensor and the magnet to fix the threaded colorless nail polish. Superglue is probably possible and screw-bonding
- The unit switches never completely (battery consumption). In "Standby" (even in the trouser pocket) are always the displays for time and all kilometers traveled visible. Cyclists, who are interested to include the number of kilometers the preseason with the new season should make a precaution before winter a note. The Mileage can then re-enter after a battery change. When replacing batteries, the device will be reset to default settings
