+ The speed of the connected USB3.0 device is just as fast or slightly slower than if they were connected directly to the computer. (Depending on the measuring inaccuracy).
+ The individual ports to each other with sufficient clearance, so that, for example, thicker USB sticks fit side by side.
+ Each port has its own status lamp. LED on: device is plugged in and in data transfer mode. LED off: No device or plugged in charging mode.
+ According to the manual of the HUB provides not connected to the PC (or PC) on all ports 2.0A (charging mode)
If the HUB connected to the PC ports provide all still 1.5A. (Data Transfer Mode)
But even that still has enough power to charge my Transformer Book in operation. This has another 5-port USB charger failed, although this 2.1A promised. (Original PSU has 2A)
+ The included USB 3.0 cable to connect to the computer has a sufficient length.
+ The AC adapter is about the size of a laptop power supply and has a status LED. It is not very warm during operation. The length of the cable is sufficient. The power supply unit has a Euro plug.
+ There are no cables are securely into the hub. All sockets are standardized. Replacement Cable -Power supply and therefore easily procurable if necessary.
= The hub is made of plastic coated with a soft touch surface. On the bottom there are two short anti-slip strips. Also, the device is quite easy. I would be a heavier machine and a complete anti-slip floor prefer.
= The Hub no devices for wall mounting.
+ The whole is delivered in an attractive package. This is without any tools to open Frustfrei. Plastic packaging is used again only for the stroke itself. Otherwise, all cardboard / paper.
= Price is when you see it as a pure USB Hub perhaps a little high. But the device can also be explicitly used as a 7-speed USB fast charger (50 Watt in charge mode). This justifies the price again.
Unrestricted buy recommendation!
