Very nice and comfortable lounge chairs

Absolutely each each side to the supplied two washers and spacer sleeve on the axle per wheel and side two further precaution 11 instead of 10mm washers in addition to installing because otherwise grind the wheels on the screw heads of the arms because the wheels do not keep enough distance to the frame. All washers of screws on the frame I would mount on the metal while plastic or poly rattan the mount push something away. The axial lengths vary in length somewhat my two are in a one touch a ground stopper damaged but otherwise functional and the other is slightly damaged the rubber edge of the outer periphery of the wheel, which internally and therefore yes can be mounted invisibly. Something craftsmanship is required eg axis needs a plastic mallet to assemble because some bending stress of the axle between two frames holes created, or slightly higher mounting pressure on some wheels to get to the axis, is required. The supplied parts are all available, with Punk H. Four plastic washers are erroneously mentioned, actually what needed and is also supplied, there are two plastic and two metal washers, although rather superfluous plastic washers two locknuts against the context of the rest would be meaningful.

Since plastic or poly rattan is odorless, neither sun nor smell cushion for something that is claimed by another recession.

Cautiously at opening the boxes with knives, including the support is equal to or cushions !!!