The repeater is a really simple maintained and beautifully understand graphical manual, when you can not misunderstand much. But this is also not hard, because the repeater has only one button, with which one attaches itself via the WPS encryption in the network and thus can add other devices later.
Simply plug it in, wait about 45 seconds to a fixed signal is, then hold the WPS button for 8 seconds. Then, the signal light will start flashing, to connect to the router. Now you have to do is press the WPS button on the router and even after a few moments to connect the repeater to the network on the 2.4 gigahertz frequency. Even easier is hardly. Time was three minutes after unpacking.
One can in addition (eg, etc. Smart TV, PC,) connect yet another device to the repeater via an Ethernet cable.
A fairly inexpensive and easy way to extend an existing wireless network.
However, with some minor restrictions. To use the Repeater makes sense you need a quite good signal from the router. Only from this point extends the network. The data throughput is a maximum of 300 Mbit / s, this is can afford less than modern routers. If one uses a plurality of terminals in the distribution range of the repeater, it throttles the data rate significantly, which can attract attention negatively, especially in video streams. Furthermore, no 5 GHz network is supported, which is also already supported by modern routers in order to transport large amounts of data at high speed.
But for normal domestic use, this repeater definitely worth the money.