My brother bought this saw, as we have several renovations before. With our terrace we have started and are completely satisfied with the saw. First, a quick summary for those who do not want to read as much.
Price-performance ratio is TOP
We have informed us in different hardware stores and internet and for the price only Sch ... found with whom I'd had a bad feeling about saws, in most cases without a hub.
Negatives:
- Table comes in many individual parts
Barely visible laser in sunlight -
- Zeroing of the saw blade should be checked with angle
- Chip collector captures only half the chips on
- Saw blade for coarse cuts
Positives:
- Fast delivery
- Laser simplifies the work when the saw is not in the sun
- Sturdy table
- Lower tensioner keep timber reliably at the table
- Hub allows cutting of wide boards, stable extract
- Fermentation cuts on XYZ angular adjustment
- Saw easy to transport
- Work safe
- Satisfactory cuts
- Price
The delivery was very quick, the saw was within 2 days since.
Assembly instructions was understandable, the building still maintains, however, since all parts of the table comes unassembled. Approximately 1 hr. Schedule.
Saw has a stable state, not to be compared with the wabbel- gizmos we've seen at the hardware store for the money.
The laser makes it easier to find the right very sawing point, however, difficult to see in sunlight.
The hold-down clamps the wood firmly reliable, so you can also arrows on the table or work with a jigsaw. With long boards but it is advisable to have a goat on board end under note
The Hub has little play, undress wobbles nothing. Wide boards can be sawn super.
The angle settings of zxy- axis to good use, but not 100% accurate in the zero position. To align the blade zero position we have taken an angle to help. For miter cuts the boards have but afterward well fitted together.
The saw blade is ok for coarse cuts. Our Douglas planks are always times pulled strongly, but also may be due to wood hard wood, our wood borers are broken regularly. Buy more to a saw blade
The exhaust does not help much, which suited us out now regardless.
Overall, you have peace of mind with this saw, since the protective cover until just before dipping into the timber is a little high, and the saw makes an overall stable impression.
The saw can be removed from the foot and so sometimes just grab the car.
Conclusion: a top price-performance ratio. this saw makes a sawing very, if you have larger projects. For DIY enthusiasts a great saw, the woman also dares to sawing :) We would buy it again.