Here is my experience about the product:
The power supply has reached a Paierverpackung with me. Included are car cell phone holder and a charging cable for the car and a user manual. The manual is only for the charging cable. As such, I believe that one needs no guidance for this, but probably caused by any set union demands required the manual has been attributing that is written in German and English. This includes technical data, safety, warranty and liability notes as well as the instructions for use included. Here is a guide for the car cell phone holder would have been rather better.
The workmanship is very good, the materials seem rather high. The installation is relatively easy, so you do not necessarily need a guide. After a short inspection of the parts you quickly figure out how the parts are to be mounted. The attachment to the windshield is very simple. Man pushing the car phone holder on the disk where you want to fix it, pushing the lever in direction to close. The vacuum the car cell phone holder sits quite firmly and securely. Just open to open the lever and then the car cell phone holder are again removed or moved to another location.
The insertion of the smart phone is very well resolved and works super easy. The smartphone is inserted in the car cell phone holder and you push the Page union Halterunsbacken with your fingers together until the phone is firmly seated. Only the knob must be placed on the back of the car cell phone holder for releasing the smartphone. Then the side support jaws are moved by the spring mechanism automatically apart again. The car cell phone holder is suitable for smart phones with a width of 56-98 mm.
The car phone holder can be adjusted individually. Because of the two rotary joints alignment can be eingesetllt arbitrarily. This allows the smartphone used in landscape mode both in portrait mode as. Positive to mention is that the lateral holding jaws inside have a thin rubber coating, which protects the phone from scratches and scuffs. Unfortunately, so is a protective rubber coating does not exist on the lower bracket. Therefore, you have to be a little careful when inserting and removing the smartphone. The maintenance is absolutely secure, even in poor road conditions. The smartphone is secure and safe in the car mobile phone holder. In my tests my smartphone was kept safe in the car cell phone holder and wiggled at all.
The charging cable that has a fixed micro USB port, which is compatible with most current smartphones (of course except Apple devices) and is about 100 cm long. The Spirelkabel is a matter of taste, whether he likes it or not. Functionally it is of course better than a normal cable, because it is not so to hanging out. But on the other it also depends where the Stroßanschluß (cigarette lighter) is mounted in a car and where to be bring the car cell phone holder. But after most people attach the car cell phone holder in the center of the disk, it should be no problem. This charging cable provides maximum charging current up to 1000 mA. I can use it to charge two different Android devices without problems.