I get exactly the items that could be seen on the product image. Purchase price 1.71 Free UK Delivery. But I definitely do not sit in the car and pay petrol money and feed the parking meter. Warensendung in bubble envelope of Article VOMM seller "adaptare" has been sent. On the delivery time, the seller has no influence, because sometimes you have to bring a week of patience. For quality: The DIN connection is flawless, the DIN plug my cable went taut in the clutch and thus can not easily fall out. On cable, there is nothing to complain about, because of the short length is in any case no significant effect on the sound expected. Lead to the devaluation only the RCA plugs, because the 4 tabs of the mass collar feathers little, they can bend quite easily. Thus, the contact with the RCA connector in the area of the outer contact is only moderate. If you're unlucky bends also one of the four tabs of the plug and you do not get the plug into the socket and has to turn everything back into shape. I was afraid and had planned anyway to solder their own RCA plug. So no problem for my purpose. More one must at such a cheap product not expect as written, would be cheaper given.
A little tip for turntables users: If you want to connect a turntable with DIN cable to an amplifier with RCA connectors, this is the right adapter. However, it may lead to hum problems that can be solved easily. Turntable with RCA connectors usually have a separate ground cable, which is connected to the chassis ground of the amplifier. For this, the amplifier has a small Schaube, at this ground wire is screwed and the noise is passé. Screw here a cable and connect it to the mass collar of the DIN connector on your turntable and the hum problem is solved. Am I doing so in my dual turntables and had no problems.
Anyway, it's easier to use this adapter as to prepare a turntable with phono plugs out.