Extremely fast and reliable

The old hard drive was slow too many bad sectors. So I bought the SSD, it was cheap and big enough
Then I copied the following procedure, the hard disk drive to the SSD
How to: Install the SD370 as a replacement for an existing 1TB hard drive on Windows 7
Prerequisite 1: No more than 400 GB of data
1. Optimize your hard disk with Auslogic Defragment
a. provide optimization option Optimize so that the data are all at the front of the hard disk
b. Make sure that no unmovable files at the rear of the hard disk
2. Reduce the partition to less than 470 GB with the Windows Computer Management
Generating a third partition of the SSD, which is greater than the Windows partition
4. burn Clonezilla on a CD
5. Booting With Clonezilla and copy partition to partition
6. Re-boot from the Windows disk and registry of SSD Change (In the example, x is the drive of the SSD)
a. reg load HKLM \ firadisk X: \ windows \ system32 \ config \ system
b. call regedit
c. Renaming the entries in HKLM \ firadisk \ MountedDevices
i \ DosDevices \ C:. change in another drive
ii. \ DosDevices \ X: (X is the drive of the SSD) in \ DosDevices \ C: Change
d. reg unload HKLM \ firadisk
7. Booting from the SSD

To ensure that everything was done.

before I started the computer, the Tea Maker've started, brought me something to read, and was hoping that the computer had booted after 3 min. Now it takes less than 20 seconds.