The air bed is a repair kit with consisting of PVC adhesive and 2 round PVC discs with about 7cm diameter (a flocked). Extinguisher can be so easily and reliably repair. After the instructions, the bonding process but takes several hours, so you should tackle a repair time. A hole should be covered with a patch 2cm diameter. The adhesive can be used sparingly, otherwise the ranges not long.
Holes themselves of a sewing needle, are very easy to find at inflated air bed by ear, back of the hand or a fluffy feather.
The air bed smells strongly of new plastic and it is not done with 1-2 hrs. Airing. Since not even enough one week. If you heat up the plastic with the body heat, it müffelt stronger and the gases do not smell right to health. It is therefore advisable for a visit to be accommodated, time to purchase this or any other comparable air bed of another manufacturer and to let evaporate as long as possible (perhaps not in the blazing sun but heat is not as disadvantageous).
Recommended would also be a dampfunduchlässige pad to use, which is often interpreted over the edge to keep contaminants away from the body.
The deck features are pretty good. When turning one hears occasionally, as the plastic in the relieved region of the webs, running from bottom to top fold. Is in itself not so tragic, if no one else is in the room.
To avoid damage, you should not throw with momentum on the bed, let kids hold no "gymnastics" on and slowly charge the bed. The webs can tear otherwise. Sharp or pointed objects are also taboo.
The flocked top gladly takes on fluff, so do not make better use of lint Flachgewebe to cover. A cover protects against cold from below, provides additional comfort, protects the top from damage and keeps the smells somewhat.
In the enclosed bag can be the airbed curled store well, so that it is protected until the next application.