After careful research, I have decided on the Invision Ultra Slim TV Wall Mount. Of course I was also informed of these recessions and was very impressed, especially that they can be pulled out. Well, now to product.
Delivery, packaging and delivery
The wall bracket is in a narrow box of Amazon, which guarantees fast delivery times, delivered. Even when lifting the boxes you realize formally that the holder has a good weight, so that the wall collapses rather than the holder. Everything safely packed, no damage - What is it?
Here are a variety of plugs, screw for attaching the wall mount to the TV and four 10-anchors with correspondingly long screws. Likewise, spacers and washers smaller with the package, which are intended for mounting on the TV.
The holder has, as already indicated above, a good weight and is therefore a little stiff. This can, however, not negative, because so blurred the TV in the operation either. Compared to a Vogels wall mount that costs 7 times, it is easier, but still affects confidence.
In the holder 7 for the mounting holes are pre-drilled. The manufacturer provides the instructions provide that the holder is fixed at the vertices, say, you have concern for his wall, so you can buy additional dowels and screws in the trade.
Dowels and screws
The plugs and screws that are present in the delivery, actually make a good impression. But I still recommend both, or at least the anchor, nachzukaufen of the Fischer brand, because they have an even higher quality.
As previously mentioned, the wall bracket has 7 holes for fixing, 3 down, 3 up and a hole at the center of the bracket. We opted for the 5 screws (vertices and center).
First, separating the TV bracket from the wall bracket by loosening the bottom nut, then you can unhook the tabs from each other. For TV mount VESA different stages are possible, therefore it is necessary to attach to the smaller platform wings for 400 x 400, which works very well with the imaginary nuts and provides stability. The bracket is fixed with the appropriate screws and spacers and budge, which can take a little bit, because you have to find the ideal combination only.
Before the wall mount is installed, the cover for the screws must be pulled apart. The wall bracket is, who would have thought of, held against the wall and the holes with water level drawn. Then we have only 8 millimeters predrilled and then increased to 10. Upon drilling vacuum cleaner of a second person under the drill, the drilling dust falls directly into the vacuum cleaner.
When fixing the holder is to be noted that the nose for the television bracket protrudes upward. The screws are bolted with a 12-Nut in the dowels, then it all budge. After the cover is simply clipped back together and also to the holder. Now it depends on the television with the opening of the nose in the one and noted that the screws look through the bracket. Thus, the TV hangs safe and the screws at the bottom are fixed with the nuts, so nothing can fall off.
Now we keep the spirit level on the TV, the result should be unsatisfactory, so we solve the nuts on top of the TV mount, characterized inaccuracies can be reversed. Tightening remember.
There are two narrow cable ducts on the attitude. The simply be removed, put the cable in the channel and clipped back to the holder.
I want the support, especially at the price, not to miss and I'm still excited, especially by the great workmanship and the rapid adaptation of different viewing angles.
Problems Samsung F6500
Many people have even written very pejorative that the holder would not be suitable for the Samsung F6500, because you could not fix the screws sufficiently. If you own the aforementioned television, you have to drive in the next hardware store and buy additional M8 washers. These offer many DIY stores also individually, so you have to acquire whole box.
I needed to mount eight M8 washers. Of course, I bought a lot more, but still less than 1 paid, so no reason for me to devalue the holder so.