Packing:
All the best and therefore arrived undamaged.
Marder Schreck:
Small, easy-to-install unit in measuring approximately 7 x 4 cm. With supplied will include a number of small cable tie to fasten the device at a suitable location. The cable required to connect have a sufficient length of about 25 cm, they are clamped according to their mark at plus and minus or ground. The device is using its own fuse protected (with supplied).
The device sends a high note of, this is not permanent, but every 15 sec. For a length of about 10 seconds. This can be heard clearly with the hood open, with hood closed as well, but not obtrusively disturbing. If you want to do work on the engine room and does not want to endure during which the beeping, it is sufficient merely turn up the backup shoe something is peace and quiet.
Success:
After installation (in about 5 minutes) I have the engine compartment wiped with a cloth and feuschten distributed on the engine cover a little chalk dust, to determine whether the marten recurs. This is not the case ... complete success until today.
Conclusion:
Small, easy to install, not sound pushy annoying simply be switched off when working in the engine compartment and it works ... RECOMMENDATION :-)