This device operates as reliable as the day and keeps the humidity constant at 60%.
The collector must, however, be emptied once every 3 days.
Alternatively, you can discharge the condensed water using a hose. But for one would need a procedure which is not available to me.
Commissioning is very simple:
Unpack, connect with current and enter the desired room humidity via buttons, finished.
Does the rest of Enfeuchter alone. After the humidity has dropped about 5% below the set value, it will turn off and resume operation again when the humidity rises 5% above the set value. This ensures that it is not off in short intervals repeatedly and turns.
The heating function can be activated in addition and increase in cold rooms, the dehumidification performance. A pleasant side effect: The room air is heated.
However, the device needs then also up to 850 watts. There is for heating-effective solutions, but this is not even thought of.
Haptics and workmanship are good. The housing is made entirely of plastic.
At the bottom there are 4 wheels, so that the dehumidifier can be easily moved.
The volume is moderate for a dehumidifier, but clearly audible (big fan).