40 trips, battery contact charred.

I bought this Porty because it is very portable and a long Abrennzeit (unlike elinchrom etc) has. To flash Hing speed. When the package arrived I was happy.
Unlike many other manufacturers, an ordinary pocket is and all well packaged.
an English manual is going to activate the radio module in Porty is not so simple. In the Aneitung the mentioned hidden. I could not find anything in the English description, had then found a German instructions on the Internet, in an indication is included on the sequence of keys that must be pressed.

Well. First day and use, it was dry and I wanted to flash of the model from behind, set all used (no Higspeed) and only 600Watt socket. The sun was setting.
After about 40 trigger was suddenly calm. The DC2 Porty was no Mux more of itself.
I searched the error only once with me (is in my nature). Battery was charged ... It was only after the wiring I had pressed the power switch. ..all right. Shooting ended prematurely ...

At home I looked at the Porty accurate.
And have not found the cause.
The contact of the battery and the plug of the generator are charred.
Well a material error. This must not happen natürlch.
Since Amazon has the function of a picture disabled in the review again (absolute pity !!).
I have the image of the charred contacts stored here: [...]

The contacts I have found nothing on the Internet. Therefore, I hope that this is a Monday-product.
I hope now that photo-tomorrow is fast and I can get a new device.

2 star because otherwise everything else was right. The display has flickered but also loading, of which there are a lot Youtube entries. But that does not bother me.

Conclusion:
suitable for SuperSync,
Price low
But even quality from China.

SUPPLEMENTARY !:
I got the replacement unit today and the contacts are already vorbeschädigt.
In addition, the new device can. Despite not toggle off. Apparently is located somewhere in the housing an unwanted bridge.
Schade :-( I had just got to the SuperSync flashes.

Reported sooner, photo-tomorrow tackled the matter and tested the equipment in the camp.
This is probably a stupid coincidence (batch error), I will still be sent to a tested device.
Now that is service :-)
Then, if all goes well, I will report here again ...

So today (one day later 10: 00h) came DHL Express and my 2nd replacement unit was delivered.
Here there is no spark and the device is working as it should.
Based on the enclosed power supply, which differs in the label, the presumption is confirmed in batch error.

Thanks to photo-tomorrow at my current job to save for the free DHL express delivery.
Let's see how the device makes over the next 6 months so ...