He has worked very nicely with its brushed stainless steel design and quite massive (weight without filling: 355 g). The burner can of course also be used in other sets as of Schulte-Ufer. For this, the following dimensions: Floor Diameter: 8.5 cm. Height: 6.5 cm. Distance from the pot should according to instruction at least 3 cm (at Schulte-Ufer set there are 4 cm). The filling is done with conventional lighter gas, which gives it at the hardware store to buy canned example favorable. Expensive special gas as it is available on Amazon, is not necessary. One only needs to push the can valve in the valve opening of the burner, then flows some seconds gas. The burner is full once (very little) emerges liquid gas. Gas filling is a fondue (we use high heatable rapeseed oil) with 1.5l fat for more than an hour. The gas burner stands on a middle stage. For us, this is quite sufficient. Refilling after a short cooling but would be no problem.
Another note: The gas should not remain in the torch for a long time. So just let burn until the end.