A professional for automatic Photos

A remote release, regardless whether it is wired or infrared control, is always essential when it arrives sharp photos on blur and you do not get exposure times beyond 1/800 second state; not to mention long exposures of several seconds or even minutes! Even the gentle press of the release button on the camera, creates a small wobble. Preferably, one uses remote release in conjunction with tripods, supportive can here also the mirror lockup (SVA) are used, mostly via the camera menu set. That is one focus, pulls the trigger and now the mirror is flipped up, the camera can now swing out, then a second press of the shutter and the shutter opens and makes the picture.

The TC-80N3 is the big brother to the RS-80N3. He also acts as a remote release from the 40D class upwards and with most analogue EOS cameras, which may have a normalized N3 connector contact. But besides offering the handset even many more features.

In four different modes divided, there is the delay timer of the self-timer on the camera is similar, but it can be accurate to the second set to a period of up to 99 hours, 99 minutes and 59 seconds. The interval timer actuates the trigger at preset time intervals from one second to 99 minutes also, etc. The slow shutter timer allows you to set the exposure time back on up to 99 minutes etc.. In exposure mode number, the number of exposures up to 99 images to be recorded successively be determined. The settings are carried out via a special Daumendrehrad, which can be pressed to confirm

In addition, the can be connected to the different modes with one another. So z. B after a period of one hour and 30 minutes, two sequences of six images at intervals of 15 minutes can be recorded independently.

You see that there is very wide range of applications here. This is reflected in the manual again. It is very comprehensive and deals with all the mixing possibilities of each mode.

The TC-80N3 comes with a CR2032 button battery. The adjustable parameters such as time, etc. are possible only with the supplied lithium CR2032 battery; the remote control can not be switched off, ie the small LCD display is always on, but the battery should last for up to three years. Without battery but a normal tripping and series of images are possible. However, the battery can be easily removed in order eventually to conserve during long non-use.

Very good finish and also as the RS80-N3 N3 connector is provided with a metal head that locks the eventual strain relief with the camera.

A professional Kabelfernauslöser whose wide range of applications can be difficult exhausted.

I thank you - you have found mistakes? If you have something unclear? Know more facts? If so, please take this opportunity to write to me.