He has 2 small disadvantages:
When used with a 3S Lipo battery you have to replace the fan either by a 12V fan or (as I've done it) to connect with the BEC (ie the recipient). Soldering must be the way anyway, because the cable to the motor and the battery to be open-ended. Included here are three 4mm sockets + Shrink Tubing. Otherwise, is double-sided tape with this, a few "Hobbywing" stickers and even a new rubber cover for the switch. In addition, a cable for programming card case (more on that).
Second drawback is that it is not really 100% waterproof, but on Youtube you will find a (English) Video is where shown how to make him really tight. Splash proof he is all but submerged in the water, you can not operate it.
I have to buy the same equal the appropriate programming card (86020010) with on what was really a good decision. Programming is carried out very very easy. (Programming with the button I have not even tried, and there is no such so many possibilities)
So all in all a very good control, I would recommend it anyone.