a switched outlet of this type has actually been missing

the switchable socket can be activated without any problems with a FRITZ! Box and also in not so perfect DECT receiving a connection can be made. The socket is used with us in order both regularly turn an espresso machine in the morning (to the heating to guarantee) as well as to the machine to turn away. A very interesting side effect is that a record of the actual electricity consumption takes place and they are displayed graphically. This was very important to me but to gain an overview on high-consumption devices without complicated setting of the usual power measurement sockets. The outlet must be programmed easily on the FRITZ! Box and the web interface and to read from. Actually, here would be appropriate if it already were integrating the Iphone- APP to switch the socket comfortable while on the go even 5 stars. Currently this only works through the dial in the Fritz box surface and manually launch the corresponding switching states. Unfortunately, AVM also indicates whether a permanent radio link between socket and FRITZ! Box is established and whether there takes place a continuous radiation exposure or not. Of these, I would also make it dependent, possibly to install more such outlets in the house, otherwise: perfect.

Addendum on 24/01/2013:
After reviewing the instructions and online help is clear that the outlet ECO DECT not supported. This means that once again - as in the past - a time exposure with pulsed DECT radiation day and night takes place. This I hold no more today for the times. I have the socket then back away and not to AVM nachbessert here in use. It convinces not know why a telephone can be "woken up" when a call from the base station, and otherwise no permanent connection is required, but this should not go to the Smart Home Network. A real shame!