A treat for computer workers

The Monitor is _die_ solution if you have something more specific requirements for the positioning of the TFT.
For me, the problem was that I had the TFT on the structure for a table Studio. He was so soon 30cm higher than he was supposed to be ergonomically. Neck problems are there actually programmed and constantly look up is somehow anyway stupid ...
Table hack or even be active as a carpenter I did not want, so as a monitor arm was ideal. This monitor arm is slightly more expensive, but it can also be used for larger angles of inclination. For example, you can arm this tendency more than 180 °, so that the monitor can be even lower than the set-up, which was the most important point for me.

The whole structure weighs about 1kg and it all comes with what you need. Allen key, screws - even in 2 variants for Vesa bracket! Once with 4 Screws for screw without tools and even normal 4 screws for the tool you need. I opted for the thumbscrews.
The arms are made of polished aluminum and make a very robust and sophisticated look.
I can turn my 22 "TFT with slight resistance without problems in all possible directions. Nevertheless, everything is stable because nothing wobbles or twists of its own.

The Monitor has a plate with holes for 100mm and 75mm spacing, therefore the TFT should also have these distances. When the TFT VESA MIS-D is compatible and can also be seen the 4 holes are present in either 100mm or 75mm distance, this must be true. In my TFT screws were rotated in the 4 provided holes that had to be removed beforehand. The old pedestal was unscrewed quickly. The arm on the table top mounted, plugged extension, plugged second arm with the holder, finished. The individual arms each have an Allen screw that can be purely turn to fix the arms. Located directly on the desk stand, there is a ring where you can set the height of the entire arm (also with a small Allen screw to fix).
The lower arm has a cable cover made of plastic, for the upper arm are 2 black cable ties included.

It should be noted that a longer signal cable / power cable for the TFT may require. The entire boom has determined to 70cm of extra length - so what on cable length should still be present in addition. In my case reached a 3m DVI cable (the standard cables are usually 2m), which you should also order for about 6 equal Amazon (there is of course 5m cable).

In summary:
Top quality, all thought out to the smallest detail, visually appealing.
Met my expectations 100% and I can recommend without compromising.