It includes the router (then via LAN) and rises by standard data in the device:
Standard IP address:
192.168.1.1
Standard User:
Admin and no password
It is a "one click" CD of the pack when you do not need allerings.
You simply connect the modem or in my case a UMTS router (Huawei B260) to the WAN port (WAN port must have a different subnet, in my case 192.168. >> 0
Can connect to already configure the WLAN or other data.
When WLAN I would recommend in any case
WPA2 and AES ONLY (TKIP is not sure)
Then still on the Wikipedia page go by WPA2 and use the password generator at the bottom.
Here is an absolutely secure password is generated.
Set the SSID (network name) and enter the PC nor the data that's it!
It is now connected.
The transmission power is TOP! I take the module set to 100%, only 12.5% still the network is even displayed in the courtyard here in council housing.
If I stop at 100% I 2 blocks away yet received! (Attention, this is dependent on the environment)
The device is MRI in time de richs never crashed !!
Settings, the device has also a lot to offer:
Parental control and access control according to schedule, port forwarding, firewall RTSP and SPI, DMZ, QoS, DDNS, detailed protocol, display of connected clients including IP and MAC!
MAC filter and DHCP can be set to get the specific clients a fixed IP from the DHCP!
There are even the names displayed that are used in Windows!
All in all, at this price a good device !!!
